JobsonsFire & Chimney Centre

Bridport · DT6

Wood burners & fluesin Bridport

Wood burners, flues and fireplace openings across Bridport and the surrounding villages. One tradesman, start to finish — survey, building work, install and HETAS certificate.

Bridport fireplaces

What the Bridport housing stock means for your fire

Bridport's housing stock is mostly Georgian and Victorian terraces off East Street, West Street and the roads running down to St Michael's, with a band of post-war housing out towards Bothenhampton and Allington. A large number of those older terraces had their fireplaces blocked up and plastered over in the sixties and seventies, and the chimney left capped.

That means most Bridport jobs start the same way: opening the breast back up, checking what state the flue is in, and lining it. The chimneys are typically tall, narrow and shared between properties, so a correctly sized insulated liner matters more here than raw stove output — an oversized burner on a big cold flue is the usual cause of a smoking fire in a terrace.

What we do

Services in Bridport

Supply, installation and the building work that goes with it. One trade on site, from knocking the opening out to lighting it for the first time.

01

Wood burner supply

Stoves supplied to suit the room and the flue — sized properly on output rather than guessed at, and covered by one warranty with the install.

02

Flue installations

Chimney liners and twin wall systems fitted, insulated and sealed, whether there's an existing chimney to work with or nothing at all.

03

HETAS certificate

Every installation signed off and certified, with the notice plate fitted. That's the paperwork your insurer and any future buyer will ask for.

04

Opening up fireplaces

Small or blocked openings widened to take a burner — lintels, beams, brickwork and all the building work that comes with it.

05

Hearths

Slate, granite, stone and concrete hearths supplied and laid to the correct size and clearances for the appliance going on them.

06

Brick slips & fireboard

Chambers lined in brick slips or fireboard for a clean, square finish that stands up to the heat and looks right in the room.

07

Chimney cowls

Anti-downdraught cowls, bird guards and rain caps fitted to the pot and made weathertight.

Not sure what you need?

Most Bridport jobs are a mix of the above. Send a photo of the fireplace and you'll get a straight answer on what's involved.

Book a free survey

How a job runs

Four stages, no surprises

You'll know what's happening, who's turning up and what it costs before anything gets knocked out.

STAGE 01

Survey

A look at the chimney, the room and the ventilation, then a written quote with the appliance and materials listed.

STAGE 02

Prep

Dust sheets down, opening formed or hearth laid, and any building work completed before the appliance arrives.

STAGE 03

Install

Liner or flue fitted, stove set, sealed and smoke tested, then lit and run up to temperature with you there.

STAGE 04

Sign-off

Certificate issued, notice plate fixed by the meter, site cleared, and a quick run through how to run it well.

Bridport questions

Asked locally

Can a mid-terrace house in Bridport take a wood burner?
Almost always. The chimney is usually still there behind the plaster even if the opening was bricked up decades ago. The survey checks the flue is sound and isn't shared, then it gets swept, lined and sealed. The only common blocker is ventilation — some later conversions need an air vent adding to meet the regulations.
Do I need permission in the Bridport conservation area?
Fitting a stove inside doesn't normally need planning permission, but if the property is listed or in the conservation area and the work changes anything visible outside — a new flue terminal, a different pot or a twin wall pipe on an elevation — it's worth a call to Dorset Council first. That gets flagged at survey stage rather than after the scaffold is up.
Will I get a HETAS certificate?
Yes. Every installation is signed off and certified, with the notice plate fitted near the meter or consumer unit. Keep it safe — your insurer and any future buyer will ask for it.
What does it cost?
Every chimney is different, so pricing follows a look at the job rather than a phone estimate. The survey and written quote are free, and the figure quoted is the figure charged unless something unexpected turns up behind the plaster — in which case you'll be told before any extra work happens.

Nearby

Also covering

Bridport is one of the areas covered across West Dorset. Further afield is usually fine too — ask and you'll get a straight answer.

Get a quote in Bridport

Send a photo of the fireplace or chimney and you'll usually get an answer the same day.

Call Get a quote